Published: 12 mars 2020(Updated: 08 juil. 2020)
6 min
6 min read
Tony Allman0

Top 3 tips for bioprocessing success

This article provides insights into maintaining sterile conditions to prevent contamination in bioreactors, ensuring successful bioprocess outcomes. Additionally, we delve into the nuances of fed-batch cultivation, offering guidance on maximizing biomass and product yield through effective nutrient management and precise monitoring. Whether you're focused on improving contamination control or refining fed-batch processes, these detailed tips equip you with the knowledge needed to advance your bioprocessing capabilities. 

Tip #1: How to prevent contamination

What is one of the worst things that could go wrong in your laboratory? Ask anyone working to a deadline in a bioprocess laboratory and a likely answer would be contamination of their cultures. Contamination can be hard to trace back to a source and difficult to remove if it is present in your working environment. Fortunately, there are a few simple steps you can follow to minimize the chances of this happening to you.

Avoid contamination of the starter culture

The most frequent cause is contamination of the starter culture. This can happen in many ways: improper handling, poor cleaning or insufficient autoclaving of the culture vessels and reactor or media components. A cleaning and disinfection procedure for laboratory equipment upstream of your bioreactor can help keep contamination from spreading via the seed culture. If contamination is present, an organism that usually grows slowly as a static culture may suddenly find the perfect growth conditions in the bioreactor, quickly overwhelming the other organisms you are actually cultivating. This problem frequently arises in cell cultures, because cells grow very slowly and can be easily flooded by rapidly growing bacteria. One possible solution is to use antibiotics to kill off bacteria.

Reliable steam sterilization of the bioreactor

Maintaining the bioreactor target temperature long enough during the autoclaving process is important to ensure effective sterilization. The temperature sensor of the autoclave should be inserted into the immersion pipe on the culture vessel. For a double-walled culture vessel, there must be enough water present in the jacket to ensure proper heat transfer during sterilization.

Careful assembly of the bioreactor

Assemble the bioreactor carefully and methodically check all seals to help to keep any unwanted visitors from reaching your culture. All sealing rings should be in perfect condition, i.e. there should not be any signs of kinks, flattening or burr formation. If in doubt, it’s better to replace the seal again, especially if it is not seated properly.


post_prevent_contamination.jpg

Check the O-rings on all components installed on the lid, regardless of whether these are intakes, sensors or plugs.


Special recommendations for cell cultures

  • Buy a sterile medium and 70% ethanol for disinfecting.
  • Wear gloves
  • Work at a sterile bench
  • Work with single-use equipment

Lastly, what do you do if contamination does occur?

An occasional lapse can be expected and does not mean your culture is spoiled. However, if you are high levels of contamination over time, this is a good indicator that something needs attention. Following the simple rules provided in this short overview should be enough to reduce the risk of contamination and help your cultures to thrive.


The cookbook

A guide for bioprocess beginners

Download this eBook for basic concepts, recipes, and strategies for bioprocesses involving cell culture and microorganisms.

Tip #2: Fed-batch cultivations in the bioreactor

When applying a fed-batch strategy, the advantages  are clear. Due to the addition of fresh nutrients, more biomass and product can be produced during exponential phase.  Furthermore, by using modern monitoring and controlling sensor systems, metabolic changes during cultivation can be detected which help to gain more process knowledge. To get out the most of your fed-batch process, we have summarized some basic hints to follow. Now nothing can stand in the way of a successful cultivation.

Preparing the bioprocess

  • A pre-calculation of the quantity of required culture liquid prevents bottlenecks, post-production and ensures a smooth running of the bioprocess. It is equally important that the feed pump used achieve the desired flow rates.

    Bench-Top Bioreactor Production

  • The resulting (waste) heat, especially in high cell density processes, should not be underestimated. Sufficient cooling can be achieved by adding a cooling finger or by connecting a recirculating chiller.
  • The metabolic state of the culture can be accurately determined by the calculation of the respiratory quotient if an exhaust gas analyzer is connected to the bioreactor.

    BlurVary-exit-gassing-analyzer.jpg

Starting the bioprocess

A fed-batch process should not be started below the minimum volume in order to guarantee that all sensors and the impeller are sufficiently covered with culture media. If a very precise flow rate has to be maintained, it is advisable not to calibrate the pump in the first hour of operation because the tubes can still stretch. Gravimetric feeding can be used to bypass unwanted side effects due to tubing changes over a long duration.

During the bioprocess

An overfilled culturing vessel is also of little use. There should always be a minimum of 20 to 30 % headspace in the culture vessel. The carbon source is not necessarily the limiting factor. Trace elements and a sufficient supply of a nitrogen source are also essential for the success of the process. Thus, for example, a higher biomass yield can be achieved with E. coli if an ammonium solution is used as a base in the process.

Tip #3: Optimizing protein yield

Optimizing of a bioprocess for protein production is more complex than for simple increase in biomass. Over-production of biomass and normal cell metabolism may limit the amount of cellular resources directed towards making the protein of interest. This short overview lists some of the key points to take into consideration for the best yield of proteins. 

The optimizing of a bioprocess for protein production is more complex than for simple increase in biomass. Over-production of biomass and normal cell metabolism may actually limit the amount of cellular resources directed towards making the protein of interest. A phased approach, with growth being followed by induction of protein manufacture and a change in operating parameters is often best. This change can be triggered at a certain biomass level by a chemical, by a change of feed or a change in a physical parameter such as temperature. The genetic changes made to optimize protein production may adversely affect the cells in terms of growth rates and sensitivity to environmental conditions e.g. heightened shear sensitivity.

The production phase may need careful control of the supply of nutrients to ensure unwanted metabolic pathways are not activated. An example is an excess of glucose leading to alcohol production in some yeasts. The culture conditions must also be maintained in a way which stops any protein produced from being damaged by denaturation or destruction from enzymes released by lysed cells.

These are the key points to take into consideration for the best yield of proteins:

  • If the nutrient supply is so excessive that microbial metabolism is only geared towards growth, the microbes will not excrete any metabolites. Managing the bioprocess as a fed-batch process can provide a remedy here. 
  • Growth conditions are often not ideal for producing, say, the targeted protein. As a result, you may need to adjust the temperature or the pH to the protein in question in order to improve protein yield and stability.
  • Does your strain can produce the desired yields when cultured in this way? Reviewing carefully the literature ahead of time.
  • It is just as important to know whether the cultivated strain excretes toxins or growth-inhibiting substances. Those can be produced by growth, by the disintegration of cells or by cell metabolism. These kinds of influencing factors can impair protein production over a period of a few days.
The cookbook

A guide for bioprocess beginners

Download this eBook for basic concepts, recipes, and strategies for bioprocesses involving cell culture and microorganisms.

Did you like this article?Leave us a rating!

1
2
3
4
5
Average: 0/5

Comments(0)

Articles Liés

Blog
20 sept. 20244 min read0
Sustainable dairy innovation: Daisy Lab uses precision fermentation to produce animal-free milk proteins in INFORS HT bioreactors

As demand for sustainable food sources surges, Daisy Lab is revolutionizing dairy production with precision fermentation technology. By using INFORS HT bioreactors, this New Zealand-based startup is producing animal-free milk proteins like whey and casein. Discover how the innovative process at Daisy Labs, now set to scale with EPA approval, is paving the way for a more sustainable future in dairy.

17 juin 20244 min read0
From classrooms to pilot production: leveraging INFORS HT innovations for bioprocess scale-up

Discover how INFORS HT bioreactors and services have supported bioprocess education and research at Universiti Sains Malaysia (USM). Joo Shun TAN (陈裕声), Associate Professor, shares insights on leveraging Minifors, Multifors, and Techfors bioreactors to enhance teaching, research, and scale-up processes.

14 juin 20244 min read0
Transforming bioprocess research and development with INFORS HT bioreactor system design

Discover how INFORS HT’s bioreactor systems enhance bioprocess R&D for the Agro-Biotechnology Institute. Explore their streamlined operations and optimized yields. An interview-style article with Dr. Siti Rokhiyah PhD., Head of Bioreactor Unit at the Agro-Biotechnology Institute (ABI), National Institutes of Biotechnology Malaysia (NIBM) in Malaysia.

20 sept. 20244 min read0
Sustainable dairy innovation: Daisy Lab uses precision fermentation to produce animal-free milk proteins in INFORS HT bioreactors

As demand for sustainable food sources surges, Daisy Lab is revolutionizing dairy production with precision fermentation technology. By using INFORS HT bioreactors, this New Zealand-based startup is producing animal-free milk proteins like whey and casein. Discover how the innovative process at Daisy Labs, now set to scale with EPA approval, is paving the way for a more sustainable future in dairy.

17 juin 20244 min read0
From classrooms to pilot production: leveraging INFORS HT innovations for bioprocess scale-up

Discover how INFORS HT bioreactors and services have supported bioprocess education and research at Universiti Sains Malaysia (USM). Joo Shun TAN (陈裕声), Associate Professor, shares insights on leveraging Minifors, Multifors, and Techfors bioreactors to enhance teaching, research, and scale-up processes.

14 juin 20244 min read0
Transforming bioprocess research and development with INFORS HT bioreactor system design

Discover how INFORS HT’s bioreactor systems enhance bioprocess R&D for the Agro-Biotechnology Institute. Explore their streamlined operations and optimized yields. An interview-style article with Dr. Siti Rokhiyah PhD., Head of Bioreactor Unit at the Agro-Biotechnology Institute (ABI), National Institutes of Biotechnology Malaysia (NIBM) in Malaysia.

Nous nous soucions de votre vie privée

Nous utilisons des cookies pour améliorer l'expérience des utilisateurs. Nous analysons notre trafic, nous personnalisons le contenu et les publicités sur notre site web et nous fournissons des fonctions de médias sociaux. Certains cookies sont nécessaires au bon fonctionnement de notre site web et à l'utilisation de ses fonctionnalités. Avec votre consentement, nous utilisons également des cookies d'analyse pour améliorer notre site web et des cookies de marketing pour afficher des publicités et du contenu sur notre site web.
Paramètres des cookies